 |
| | Display Technology and Resolution | | - 3-chip DLP®
- SXGA+ (1400 x 1050) resolution
|
|
| Illumination Technology | | - Dual (redundant) 200W Mercury
|
|
| Brightness | | - 1875 ANSI lumens @ 150W (single lamp mode)
- 2500 ANSI lumens @ 200W (single lamp mode)
- 5000 ANSI lumens @ 200W (dual lamp mode)
- 3750 ANSI lumens @ 150W (dual lamp mode)
|
|
| Brightness Uniformity | | - > 90%, up to 100% with uniform control feature
|
|
| Contrast Ratio | | - 2500-10,000:1 Full Field
- 650:1 ANSI
|
|
| Color Temperature Range | | |
|
| Expected Lamp Life (24/7 operation) | | - Up to 3,000 hrs starting @ 150W
- Up to 2,500 hrs @ 200W
|
|
| Lens Type | | - 0.73:1 Low distortion Lens
- 1.25:1 Low distortion Lens
|
|
| Lens Offset | | - Motorized - Horizontal: up to 50%, Vertical: up to 110%
|
|
| Screen Size/Range | | - 0.73:1 lens: 60” to 175” diagonal
- 1.25:1 lens: 60” to 100” diagonal
|
|
| Power Requirements | | - 100 VAC to 240VAC ±10% @ 50/60 Hz
- Power consumption: 870W Maximum (dual lamp mode)
- Thermal dissipation: 2971 BTU/hr
- Rating: 8.7A @ 100V
|
|
| Weight | | - 55 lb (25 kg) (excluding optional lens)
- Shipping weight: 75 lb (34 kg)
|
|
| Horizontal/Vertical Frequency | | - Horizontal - 15 kHz to 120 kHz
- Vertical - 23.97 Hz to 150 Hz
|
|
| Pixel Clock | | |
|
| Standard Inputs | | |
|
| Input Signal Compatibility | | - Christie display wall controllers
- Compatibility with VGA through to QXGA
- Accepts and displays all currently known HDTV formats (1080i, 720p, 576i/p, 480i/p)
- Separate, composite sync and sync-on-green compatible
- Accepts composite video, S-video (Y/C), component video (YUV) and HDTV (YPbPr)
|
|
| Advanced Tiling Features | | - Comprehensive Color Adjustment (CCA™) for true colour matching
- Brightness Uniformity Control provides up to 100% uniformity capability for critical applications
- Low distortion tiling lens (sold separately on “DX” and "DL" models)
Input tiling feature up to a 3x3 array ("DL" models only)
|
|
| Color Processing | | - True 10 bit digital colour processing
- 13 bit colour correction
|
|
| Control/Networking | | - 2 RS-232 ports and 1 RS-422 port
- Built-in backlit keypad (“DX” and "DL" models only)
- Field upgradable software via RS-232 network or Ethernet
- On-board ChristieNET™ connectivity (RJ45)
- Intuitive, easy to use graphical user interface
- IR remote control
- GPIO port
|
|
| Optional Accessories | | - Input modules – Dual Link DVI, Analog, Dual SD/HDSDI
- Twin HDMI, Video Decoder
- Coarse dust filter
- Ceiling mount
- Lens
- Wired remote control
- Service manual
|
|
| Operating Environment | | - Operating temperature: 5ºC to 35ºC (40ºF to 95ºF)
- Operating temperature: -5ºC to 40ºC (40ºF to 95ºF)
- Non-operating temperature: -20ºC to 50ºC (-4ºF to 122ºF)
- Humidity: 20 - 80% non-condensing
- Altitude: 0 to 3000 m (0 to 10,000 ft)
|
|
| Reliability | | - MTBF: >30,000 hrs (for major modules)
- Expected life of DMD: 100,000 hours
- Continuous diagnostic monitoring with notification
|
|
| Serviceability | | - Modular design
- MTTR: < 15 minutes
- Lamp change: < 5 minutes
|
|
| Regulatory Approvals | | - IEC60950-1:2001; UL60950-1 1st edition;
- CAN/CSA C22.2 No.60950-1-03 1st edition
- EMC - emissions: FCC part 15 and EN55022 (CISPR22) Class A EMC - immunity: EN55024
- CE, RoHS, WEEE
- CCC, eK, PSE (pending)
- This product conforms to all relevant European directives, safety, health and environmental concerns
|
|
| Warranty | | - 2 years parts and labour (excluding lamp)
- Lamp - prorated for original lamps and all service replacement lamps
|
|
| Notes on Specifications | | - Contrast ratio may vary depending on brightness mode (maximum specifications shown).
- For UHP lamps, expected lamp life is based on lamp manufacturer’s rating. Typical expectation is that greater than 50% of lamps will reach lamp life rating when operated as specified.
- May not be functional on single-chip models on initial units shipped, but will be available via field upgrade through software when available. Contact your Christie representative for more details.
- Nominal lens throw ratios shown. Actual throw distance may be within 5% of nominal value. Contact your Christie representative for details.
- For best color matching between adjacent displays, it is recommend that White Boost be at 0% setting.
|
| |
Due to constant research, specifications and features are subject to change without notice.
|